These are custom d-pad & thumbstick replacement pieces designed to improve the tactility and responsiveness of the Jaguar 6-button and 3-button controller directional inputs. There is some variance amongst the different Jaguar controllers that determine the type of piece they use. You will have to open your controller to verify what you have.
Thin style pieces are intended to replace the original d-pad of both Atari-branded and reproduction 6-button Jaguar controllers. They will also go in 3-button controllers that have a red plastic center post screwed into the top PCB inside. You must unscrew this center post to install the 'Thin' type piece in a 3-button controller.
Thick style pieces are intended for 3-button controllers that have a white plastic harness inside, they will not work in any other type of Jaguar controller.
Please review the information provided in this guide to help determine if you need a 'thin' or 'thick' style piece for your controller.
If you're unsure then reach out with a question!
Contact / Customer Support
If you wish, your controller can be changed back to its original state at any time, the modification is reversible and does not damage anything.
Please note! NO controllers are provided with this purchase. Installation of the new piece is ultimately the responsibility of the buyer!
